KEBUTUHAN KALORI DAN PENENTUAN WAKTU ISTIRAHAT MENGGUNAKAN PENDEKATAN FISIOLOGIS PADA PROSES PRODUKSI DI CV. RIFKY ARAFA

Authors

  • Muhamad Rafli Ramadhan Universitas Bina Bangsa
  • Asih Setyo Rini Universitas Bina Bangsa
  • Siti Hanan Universitas Bina Bangsa
  • Irfan Muhammad Universitas Bina Bangsa
  • Sherin Ramadhania Universitas Bina Bangsa
  • Lucky Setiawan Universitas Bina Bangsa

DOI:

https://doi.org/10.46306/tgc.v3i2.146

Keywords:

Kalori, Fisiologis, Beban Kerja, Physiological, Calori, Workload

Abstract

CV. Rifky Arafa, one of the companies engaged in garments that provides the needs of goods and services for making alma mater, suits, jackets, hats, togas, and bags, located in Kadu Genep Village, Petir District, Serang-Banten Regency. This research was conducted on 5 production operators of sewing machine parts. The purpose of this study was to determine how much calorie needs and how long rest periods needed by operators based on pulse rate and energy consumption and find out the optimal rest time for sewing machine part production process operators. This research method uses a physiological approach method with the calculation of measurement data of 10 pulses, from the calculation of the average working pulse rate (DNK) and cardiovascular load (%CVL) as well as the level of energy consumption needed by the operator when doing work, based on calculations using the highest average physiological approach of the work pulse rate (DNK) with a value of 90, 67 beats/minute and cardiovascular load (%CVL) with an indigo of 18.18% which classified as light workload and can be classified as not fatigue when working because of the value <30% if the %CVL value reaches 30% - 60% then repair or additional hours of rest time are needed. The calorie requirement required by the operator is 0.978 Kcal/min based on the calculation of energy consumption spent during work of 3.606 Kcal/min and energy expenditure at the time before work of 2.628 Kcal/min. For the determination of rest time through the calculation of energy consumption of 0.978 Kcal/min states that no rest time is needed during the work process at the production process operator. (Rt = 0) This means that the rest hours given or that have been set in the CV. Rifky Arafa which is 60 minutes is enough

Downloads

Download data is not yet available.

References

Fathimahhayati, D., L., et.al. 2019. Analisis Beban Kerja Fisiologi Pada Proses Pembuatan Tahu Berdasarkan Konsumsi Energi (Studi Kasus: Ud. Lancar Abadi Samarinda). Jurnal INTECH Teknik Industri Universitas Serang Raya Vol 5 No 2, Desember 2019, 100-106.

Hasibuan, C., F., et.al. 2021. Analisis Pengukuran Beban Kerja dengan Menggunakan Cardiovascular Load (CVL) pada PT. XYZ,” Journal of Industrial And Manufacture Engineering, Vol. 5, No. 1, Hal. 65-71, 2021.

Hidayat, W., et.al. 2020. Analisis Beban Kerja Fisiologis sebagai Dasar Penentuan Waktu Istirahat untuk Mengurangi Kelelahan Kerja. Jurnal Optimasi Sistem Industri Vol 13 No.1 Juni 2020.

Ihsan., F., & Renilaili, 2022. Analisis Terhadap Kelelahan Beban Kerja Karyawan Menggunakan Metode Fisiologi. Pada PT. Cahaya Sawit Sejahtera. Bina Darma Conference on Engineering Science.

Perdana, S.T. 2019. Analisis Beban Kerja Fisiologi Pada Proses Produksi Pembuatan Rumah Boneka Dengan Pekerja Penyandang Disabilitas. Faktor Exacta12 (3): 193-200, 2019.

Prabaswari, A., D., et.al. 2020. Analisis Postur Kerja pada Perusahaan yang Bergerak Bidang Pemeriksaan, Pengawasan, Pengujian, dan Pengkajian. Jurnal Penelitian dan Aplikasi Sistem & Teknik Industri (PASTI) Vol. XIV, No. 2, Agustus 2020, pp.181-192.

Qoyyimah, M., et.al. 2019. Pengaruh Beban Kerja, Stres Kerja dan Lingkungan Kerja Terhadap Kinerja Karyawan Bagian Produksi PT. INKA Multi Solusi Madiun. Jurnal Ilmiah Bidang Manajemen dan Bisnis Vol. 2, No. 1 (2019): June, pp. 11-20 Economic Faculty, Universitas Muhammadiyah Ponorogo.

Rachmawati, S., et.al. 2020. Analisis Pemenuhan Kebutuhan Kalori Berdasarkan Jenis Pekerjaan Pada Tenaga Kerja Di Area Tambang Bawah Tanah Pt X Indonesia Indonesia. Journal of Industrial Hygiene and Occupational Health, Vol. 4, No. 2.

Rini, A.S., Padhil, A., Rahmatullah, A., Khaerudin, D. 2023. Determination Of Energy Needs Of KU-IV Swimming Athletes at The Krakatau Atlantic Swimming Association (PRKA) Swimming Club. Journal Of Industrial Engineering. JIEM Volume 8. No.2.

Yudiantyo, W. 2020. Perancangan Ergonomis Pegangan Pendorong Kursi Roda Untuk Meninimasi Kesakitan Pergelangan Tangan. Journal Of Integrated System, VOL 3. NO. 1, JUNI 2020: 40-48

Downloads

Published

2023-12-30

How to Cite

Ramadhan, M. R. ., Rini, A. S. ., Hanan, S. ., Muhammad, I. ., Ramadhania, S. ., & Setiawan, L. . (2023). KEBUTUHAN KALORI DAN PENENTUAN WAKTU ISTIRAHAT MENGGUNAKAN PENDEKATAN FISIOLOGIS PADA PROSES PRODUKSI DI CV. RIFKY ARAFA. Jurnal Ilmiah Teknik Dan Manajemen Industri, 3(2), 972–978. https://doi.org/10.46306/tgc.v3i2.146